This is my Blade 400 being flown by Joe at his house. It was a good day. I learned a lot about getting things set right like the pitch and throttle curves. After seeing my heli fly around with untracked blades and a different battery I was amazed. After the blades were tracking perfectly it flow really smooth.

Mostly Stock Blade CP (2 of 2)

These are the rest of the pictures.

Mostly Stock Blade CP (1 of 2)

These are images of my E-Flite Blade CP (Original). It has the aluminum bell mixer upgrade blade grip set. I am still unable to get it to fly. I am working on the setup. The head has a wobble to it. Also the battery I have used is a Stock 9.6v 650mAh Ni-MH. I have purchased a new Lipo battery which is a E-Flite 11.1v 800mAh. If anyone has any input please feel free to share.

Blade CP with esky parts

Photo 1. This is the entire auction I won. On the right you can see the after market tail motor with the white tail rotor. It spins up and seems to have some serious torque

Photo 2. This is the Telebee Gyro. Looked like it powers up and initializes correctly.

Photo 3. This is the esky recevier and E-flite 2 in 1 control uint. It looks like the 2 in 1 unit connector has a loose power connection, which make the heli glitch and put power to the motors without me commanding it.

Photo 4. This is just a side shot of it. The blades are on my other CP now though.

So just from looking at these pictures and reading my runryder post please give me any additional help you can. Thanks!